farkvm.blogg.se

Then take hold of the blade, ease it forward and turn through 90 degrees.

Theoretically you should turn the knob anticlockwise three turns but it doesn't seem to make any difference on my one. 1 Answer SOURCE: Pull up the knob on the front at the top of the machine and push the yellow bit forward.

The Bosch Pst 53 A User Manual version is limited to 14 days or 50 uses. That, in addition to detailed info about your hard drives overall health, is delightful for power users while being useful for the average folks. Jun 14, 2010|.The same menu makes it a snap to kill, set the priority or affinity of the selected process. If it falls out and you lose it they're a bit of a nuisance to come. Be careful not to tip your saw over while the screw is loose. Tighten up the clamp screw and you're good to go. Once the clamp screw is loosened, twist the blade about 90 deg and you should be able to pull it out (don't cut yourself, by accident) Put the new blade in with the same orientation and twist so the blades are facing the front of the saw. Use a long thin blade screw driver to loosen the clamp screw. In the handle directly over the blade there is a hole with a clamp screw at the bottom. Unplug the saw before you change the blade. I mention it, because it shows the clamp screw which hold the blade in place (35 on the diagram). There's an exploded diagram of a similar model.